Toilet Repair & Installation — Seattle WA 98161 & Queen Anne

Toilet problems are disruptive and — when involving leaks — can cause significant water waste and property damage if left unaddressed. A running toilet can waste up to 200 gallons of water per day, costing Seattle homeowners significantly on water bills. Queen Anne Seattle Plumbing provides fast, professional toilet repair and replacement throughout the 98161 zip code, Queen Anne Hill, Magnolia, Ballard, and all surrounding Seattle neighborhoods. We fix toilets right the first time — from simple flapper replacements to complete toilet installations.

Toilet Problems We Fix in Seattle

Running Toilet

The sound of a toilet that won't stop running is both annoying and expensive. Most running toilets are caused by a failed flapper — the rubber seal at the bottom of the tank that controls water flow into the bowl. Worn flappers allow water to continuously trickle from tank to bowl, activating the fill valve repeatedly. We replace flappers, fill valves, and flush handles — typically a quick, affordable fix. If your toilet has been running long-term and Seattle Public Utilities has flagged unusual water consumption, call us right away.

Slow or Weak Flush

A toilet that doesn't fully flush on the first try is a frustrating daily problem. Causes include clogged rim jets (the small holes under the toilet bowl rim that direct flush water), a partially blocked main toilet drain, low water level in the tank, or a worn flush valve. In older Queen Anne home bathrooms where water pressure may be lower due to aging supply pipes, we sometimes find that upgrading to a pressure-assisted toilet resolves chronic weak-flush complaints.

Toilet Leaking at Base

Water pooling around the base of a toilet almost always indicates a failed wax ring — the seal between the toilet horn and the floor drain. A compromised wax ring allows sewer gas to escape into your bathroom and can allow sewage to seep onto and beneath the floor, causing damage to subfloor materials. This is a repair that should not be delayed. We reset toilets on new wax rings, and if subfloor damage has occurred, we can assess the extent and recommend appropriate remediation.

Toilet Won't Flush (Completely Dead)

If pushing the handle produces nothing — no water movement, no sound — the flush handle mechanism or chain connecting handle to flapper has likely failed. These are simple mechanical fixes that we can usually complete within minutes of arriving on-site.

Clogged Toilet

Most toilet clogs can be cleared with a plunger, but persistent clogs, recurring clogs, or clogs that won't yield to plunging suggest a deeper issue — a partial obstruction in the drain line below the toilet, or a main drain line problem. We use professional drain snaking equipment to clear stubborn toilet clogs and diagnose the underlying cause to prevent recurrence.

Cracked Toilet Bowl or Tank

Cracked porcelain cannot be reliably repaired — replacement is the only safe solution. We remove and properly dispose of cracked toilet fixtures and install new toilets of your choosing, properly sized and code-compliant for Seattle's current water efficiency requirements.

Toilet Replacement and Upgrade Options

If your Seattle home's toilets are original to a pre-1994 installation, replacing them with modern high-efficiency toilets (HETs) can save a significant amount of water annually. Pre-1994 toilets use 3.5-5 gallons per flush; modern WaterSense-certified toilets use 1.28 gallons or less. Seattle homeowners also have access to some of today's best toilet technology — dual-flush models, pressure-assist units for lower-pressure systems, one-piece designs that are easier to clean, and comfort-height toilets for aging-in-place accessibility. We'll help you find the right toilet for your Queen Anne or Seattle home's needs.